CSMS# 18-000079 - Initiation of AD/CVD Investigations: Certain Plastic Decorative Ribbon from the PRC
U.S. Customs and Border Protection sent this bulletin at 01/23/2018 01:20 PM ESTYou are subscribed to Trade Policy Updates for U.S. Customs and Border Protection. This information has recently been updated, and is now available.
01/23/2018 01:10 PM EST
Trade Policy Updates
Initiation of Antidumping and Countervailing Duty Investigations: Certain Plastic Decorative Ribbon from the People’s Republic of China
On January 16, 2018, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “certain plastic decorative ribbon from the People’s Republic of China” (China) (Initiation Notices). These investigations have been assigned the following case numbers: A-570-075 and C-570-076.
The Scope of Merchandise covered by these investigations reads as follows:
The merchandise covered by this investigation is certain plastic decorative ribbon having a width (measured at the narrowest span of the ribbon) of less than or equal to four (4) inches in actual measurement, including but not limited to ribbon wound onto itself; a spool, a core or a tube (with or without flanges); attached to a card or strip; wound into a keg- or egg-shaped configuration; made into bows, bow-like items, or other shapes or configurations; and whether or not packaged or labeled for retail sale. The subject merchandise is typically made of substrates of polypropylene, but may be made in whole or in part of any type of plastic, including without limitation, plastic derived from petroleum products and plastic derived from cellulose products. Unless the context otherwise clearly indicates, the word “ribbon” used in the singular includes the plural and the plural “ribbons” includes the singular.
The subject merchandise includes ribbons comprised of one or more layers of substrates made, in whole or in part, of plastics adhered to each other, regardless of the method used to adhere the layers together, including without limitation, ribbons comprised of layers of substrates adhered to each other through a lamination process. Subject merchandise also includes ribbons comprised of (a) one or more layers of substrates made, in whole or in part, of plastics adhered to (b) one or more layers of substrates made, in whole or in part, of non-plastic materials, including, without limitation, substrates made, in whole or in part, of fabric.
The ribbons subject to this investigation may be of any color or combination of colors (including without limitation, ribbons that are transparent, translucent or opaque) and may or may not bear words or images, including without limitation, those of a holiday motif. The subject merchandise includes ribbons with embellishments and/or treatments, including, without limitation, ribbons that are printed, hot-stamped, coated, laminated, flocked, crimped, die-cut, embossed (or that otherwise have impressed designs, images, words or patterns), and ribbons with holographic, metallic, glitter or iridescent finishes.
Subject merchandise includes “pull-bows” an assemblage of ribbons connected to one another, folded flat, and equipped with a means to form such ribbons into the shape of a bow by pulling on a length of material affixed to such assemblage, and “pre-notched” bows, an assemblage of notched ribbon loops arranged one inside the other with the notches in alignment and affixed to each other where notched, and which the end user forms into a bow by separating and spreading the loops circularly around the notches, which form the center of the bow. Subject merchandise includes ribbons that are packaged with non-subject merchandise, including ensembles that include ribbons and other products, such as gift wrap, gift bags, gift tags and/or other gift packaging products. The ribbons are covered by the scope of this investigation; the “other products” (i.e., the other, non-subject merchandise included in the ensemble) are not covered by the scope of this investigation.
Excluded from the scope of this investigation are the following: (1) ribbons formed exclusively by weaving plastic threads together; (2) ribbons that have metal wire in, on, or along the entirety of each of the longitudinal edges of the ribbon; (3) ribbons with an adhesive coating covering the entire span between the longitudinal edges of the ribbon for the entire length of the ribbon; (4) ribbon formed into a bow without a tab or other means for attaching the bow to an object using adhesives, where the bow has: (a) an outer layer that is either flocked or made of fabric, and (b) a flexible metal wire at the base that is suitable for attaching the bow to a Christmas tree or other object by twist-tying; (5) elastic ribbons, meaning ribbons that elongate when stretched and return to their original dimension when the stretching load is removed; (6) ribbons affixed as a decorative detail to non-subject merchandise, such as a gift bag, gift box, gift tin, greeting card or plush toy, or affixed (including by tying) as a decorative detail to packaging containing non subject merchandise; (7) ribbons that are (a) affixed to non-subject merchandise as a working component of such non-subject merchandise, such as where the ribbon comprises a book marker, bag cinch, or part of an identity card holder, or (b) affixed (including by tying) to non-subject merchandise as a working component that holds or packages such non-subject merchandise or attaches packaging or labeling to such non-subject merchandise, such as a “belly band” around a pair of pajamas, a pair of socks or a blanket; (8) imitation raffia made of plastics having a thickness not more than one (1) mil when measured in an unfolded/untwisted state; and (9) ribbons in the form of bows having a diameter of less than seven-eighths (7/8) of an inch, or having a diameter of more than 16 inches, based on actual measurement. For purposes of this exclusion, the diameter of a bow is equal to the diameter of the smallest circular ring through which the bow will pass without compressing the bow.
Further, excluded from the scope of the antidumping duty order are any products covered by the existing antidumping duty order on polyethylene terephthalate film, sheet, and strip (PET Film) from the People's Republic of China (China). See Polyethylene Terephthalate Film, Sheet, and Strip from Brazil, the People's Republic of China and the United Arab Emirates: Antidumping Duty Orders and Amended Final Determination of Sales at Less Than Fair Value for the United Arab Emirates, 73 FR 66595 (November 10, 2008).
Merchandise covered by this investigation is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 3920.20.0015 and 3926.40.0010. Merchandise covered by this investigation also may enter under subheadings 3920.10.0000; 3920.20.0055; 3920.30.0000; 3920.43.5000; 3920.49.0000; 3920.62.0050; 3920.62.0090; 3920.69.0000; 3921.90.1100; 3921.90.1500; 3921.90.1910; 3921.90.1950; 3921.90.4010; 3921.90.4090; 3926.90.9996; 5404.90.0000; 9505.90.4000; 4601.99.9000; 4602.90.0000; 5609.00.3000; 5609.00.4000; and 6307.90.9889. These HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of this investigation is dispositive.
Requirements for Submitting Comments on the Scope of the Investigations: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determination, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on Monday, February 5, 2018, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on Thursday, February 15, 2018, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:
Mark Hoadley at (202) 482-3148 (Antidumping Duty Investigation);
Maliha Khan at (202) 482-0895 (Countervailing Duty Investigation).
Initiation of Antidumping and Countervailing Duty Investigations: Certain Plastic Decorative Ribbon from the People’s Republic of China
On January 16, 2018, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “certain plastic decorative ribbon from the People’s Republic of China” (China) (Initiation Notices). These investigations have been assigned the following case numbers: A-570-075 and C-570-076.
The Scope of Merchandise covered by these investigations reads as follows:
The merchandise covered by this investigation is certain plastic decorative ribbon having a width (measured at the narrowest span of the ribbon) of less than or equal to four (4) inches in actual measurement, including but not limited to ribbon wound onto itself; a spool, a core or a tube (with or without flanges); attached to a card or strip; wound into a keg- or egg-shaped configuration; made into bows, bow-like items, or other shapes or configurations; and whether or not packaged or labeled for retail sale. The subject merchandise is typically made of substrates of polypropylene, but may be made in whole or in part of any type of plastic, including without limitation, plastic derived from petroleum products and plastic derived from cellulose products. Unless the context otherwise clearly indicates, the word “ribbon” used in the singular includes the plural and the plural “ribbons” includes the singular.
The subject merchandise includes ribbons comprised of one or more layers of substrates made, in whole or in part, of plastics adhered to each other, regardless of the method used to adhere the layers together, including without limitation, ribbons comprised of layers of substrates adhered to each other through a lamination process. Subject merchandise also includes ribbons comprised of (a) one or more layers of substrates made, in whole or in part, of plastics adhered to (b) one or more layers of substrates made, in whole or in part, of non-plastic materials, including, without limitation, substrates made, in whole or in part, of fabric.
The ribbons subject to this investigation may be of any color or combination of colors (including without limitation, ribbons that are transparent, translucent or opaque) and may or may not bear words or images, including without limitation, those of a holiday motif. The subject merchandise includes ribbons with embellishments and/or treatments, including, without limitation, ribbons that are printed, hot-stamped, coated, laminated, flocked, crimped, die-cut, embossed (or that otherwise have impressed designs, images, words or patterns), and ribbons with holographic, metallic, glitter or iridescent finishes.
Subject merchandise includes “pull-bows” an assemblage of ribbons connected to one another, folded flat, and equipped with a means to form such ribbons into the shape of a bow by pulling on a length of material affixed to such assemblage, and “pre-notched” bows, an assemblage of notched ribbon loops arranged one inside the other with the notches in alignment and affixed to each other where notched, and which the end user forms into a bow by separating and spreading the loops circularly around the notches, which form the center of the bow. Subject merchandise includes ribbons that are packaged with non-subject merchandise, including ensembles that include ribbons and other products, such as gift wrap, gift bags, gift tags and/or other gift packaging products. The ribbons are covered by the scope of this investigation; the “other products” (i.e., the other, non-subject merchandise included in the ensemble) are not covered by the scope of this investigation.
Excluded from the scope of this investigation are the following: (1) ribbons formed exclusively by weaving plastic threads together; (2) ribbons that have metal wire in, on, or along the entirety of each of the longitudinal edges of the ribbon; (3) ribbons with an adhesive coating covering the entire span between the longitudinal edges of the ribbon for the entire length of the ribbon; (4) ribbon formed into a bow without a tab or other means for attaching the bow to an object using adhesives, where the bow has: (a) an outer layer that is either flocked or made of fabric, and (b) a flexible metal wire at the base that is suitable for attaching the bow to a Christmas tree or other object by twist-tying; (5) elastic ribbons, meaning ribbons that elongate when stretched and return to their original dimension when the stretching load is removed; (6) ribbons affixed as a decorative detail to non-subject merchandise, such as a gift bag, gift box, gift tin, greeting card or plush toy, or affixed (including by tying) as a decorative detail to packaging containing non subject merchandise; (7) ribbons that are (a) affixed to non-subject merchandise as a working component of such non-subject merchandise, such as where the ribbon comprises a book marker, bag cinch, or part of an identity card holder, or (b) affixed (including by tying) to non-subject merchandise as a working component that holds or packages such non-subject merchandise or attaches packaging or labeling to such non-subject merchandise, such as a “belly band” around a pair of pajamas, a pair of socks or a blanket; (8) imitation raffia made of plastics having a thickness not more than one (1) mil when measured in an unfolded/untwisted state; and (9) ribbons in the form of bows having a diameter of less than seven-eighths (7/8) of an inch, or having a diameter of more than 16 inches, based on actual measurement. For purposes of this exclusion, the diameter of a bow is equal to the diameter of the smallest circular ring through which the bow will pass without compressing the bow.
Further, excluded from the scope of the antidumping duty order are any products covered by the existing antidumping duty order on polyethylene terephthalate film, sheet, and strip (PET Film) from the People's Republic of China (China). See Polyethylene Terephthalate Film, Sheet, and Strip from Brazil, the People's Republic of China and the United Arab Emirates: Antidumping Duty Orders and Amended Final Determination of Sales at Less Than Fair Value for the United Arab Emirates, 73 FR 66595 (November 10, 2008).
Merchandise covered by this investigation is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 3920.20.0015 and 3926.40.0010. Merchandise covered by this investigation also may enter under subheadings 3920.10.0000; 3920.20.0055; 3920.30.0000; 3920.43.5000; 3920.49.0000; 3920.62.0050; 3920.62.0090; 3920.69.0000; 3921.90.1100; 3921.90.1500; 3921.90.1910; 3921.90.1950; 3921.90.4010; 3921.90.4090; 3926.90.9996; 5404.90.0000; 9505.90.4000; 4601.99.9000; 4602.90.0000; 5609.00.3000; 5609.00.4000; and 6307.90.9889. These HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope of this investigation is dispositive.
Requirements for Submitting Comments on the Scope of the Investigations: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determination, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on Monday, February 5, 2018, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on Thursday, February 15, 2018, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:
Mark Hoadley at (202) 482-3148 (Antidumping Duty Investigation);
Maliha Khan at (202) 482-0895 (Countervailing Duty Investigation).
Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page. You will need to use your e-mail address to log in. If you have questions or problems with the subscription service, please contact subscriberhelp.govdelivery.com.
This service is provided to you at no charge by U.S. Customs and Border Protection.
Privacy Policy | GovDelivery is providing this information on behalf of U.S. Department of Homeland Security, and may not use the information for any other purposes.
 |
 |