T1, Black Pine : reduce branch that has approximately 56cm long crack, maximum reduction of 1.5m, maximum diameter of cuts (MDC) less than 50mm diameter, via thinning to suitable growth points to lessen end loads; removal of branch with approximately 45cm long crack; thinning of lateral branch foliar areas by 10%, MDC less than 50mm.T2, Black Pine : thinning of foliar area by 10% above tear wound with MDC less than 50mm; reduce via thinning to suitable growth points the end loads of 6.7m long primary branch with a reduction of up to 1.5m, 50mm MDC; 10% crown thinning, MDC of less than 50mm.T3, Eucalyptus : fell. (Wrong species for position: replace with alternate species)T4, Eucalyptus : fell. (Wrong species for position: replace with alternate species) | Validated: 29/01/2026
Rear extension into the courtyard to improve the kitchen's spatial layout, create a snug, and incorporate a WC/utility within the existing outbuilding | Validated: 28/01/2026
Proposed garage to side elevation, with new drive access from Mount Close, including drop kerb; drop kerb to be extended to existing drive | Validated: 27/01/2026
Removal of existing extension and conservatory and the construction of new single storey extension on rear on the same footprint/ foundation | Validated: 27/01/2026
Western Red Cedar : reduce the height by taking off 3.5-4.5m and to reduce the south facing side of the tree that is brushing against a building, taking off no more that 2m. | Validated: 27/01/2026
Certificate of Lawfulness, confirming the existing lawful use of The Store, Castle Street, Axminster, as falling within Class E (Commercial, Business - specifically motor servicing/maintenance, retail, and office use) | Validated: 26/01/2026
Non-Material Amendment for 25/0700/FUL: Change the bi-fold door arrangement to the east and south elevations to incorporate a corner bi-fold door detail and omission of vertical timber boarding due to fenestration change. | Validated: 26/01/2026
Part retrospective application for the retention of the existing building for a flexible commercial use (Class E and B8) and retention of car park | Validated: 26/01/2026
Poplar - sever and remove roots up to 50mm diameter within a 1m section of the root protection area (RPA) at a depth of 0.5m. Root mitigation will be by pruning done using hand tools followed by installation of protective soil covers. Rebuilding of the retaining boundary wall. | Validated: 23/01/2026
T1, Lombardy Poplar : Crown reduce to previous pruning points, approximate 4m reduction; attending to all parts of the canopy; maximum diameter of cut 75-100mm. | Validated: 23/01/2026
