Hawthorn (x2) : reduce the weight at the top of both trees, to remove dead branches and to create a more stable and balanced shaped canopy. The overall reduction in height will be approx 0.5m. | Validated: 26/10/2023
Revised proposals for the construction of a two storey dwelling with associated car parking and amenity space [Previously submitted under 22/1516/FUL] | Validated: 26/10/2023
T1, Holm Oak : crown reduce to existing pollards points approximately 3.5-4m above ground level. Reduce all aspects of tree to leave a balanced shape to allow a new crown formation. Maximum diameter of cuts 50mm. | Validated: 26/10/2023
Proposed single storey link from main house to conservatory, create doorway from existing house to conservatory, re-render conservatory external walls, replace single door on north/east elevation, replace 1no. bay window with double doors on south/east elevation. | Validated: 25/10/2023
x1 Pittosporum : Trim all round hard back to previous pruning points & shape. Escollonia Hedge (adjacent to garages) : Trim hard back to previous pruning points & shape. x1Elder : Prune hard back to previous pruning points & shape. x1 Katsura Tree : Pune back hard to previous pruning points & shape. x1 Bay Tree : Prune back to previous pruning points & shape to achieve an adequate clearance from BT wires. | Validated: 23/10/2023
T1, Beech: reduce height by no more than 3m, to reduce the canopy spread to the north, south and west by no more than 2m. To reduce canopy spread to the east by no more than 3m. Leaving a tree height of 19m with a crown spread of no less than 6m, 6m, 5.5m and 6m to the north, east, south and west respectively. Maximum cut diameter of 50mm.Whilst the tree has a high amenity value, it has begun to impact the property both physically and in terms of shade cast. This work is applied for in the interest of managing the tree in relation to the space available, giving suitable clearance to the property and also improve light levels to both the property and the outside space, whilst retaining good form and sufficient foliar area. | Validated: 23/10/2023
T1, T2 & T3 Oaks - cyclical re-pollard, removing new growth to historic pollard points / knuckles. Pruning cuts up to a maximum of 60mm diameter. | Validated: 23/10/2023
Reduce height of chimney stack and cap on west elevation and remove non-breathable paint from external walls on north, east and west elevations using Doff and IBIX System | Validated: 20/10/2023
