CSMS# 19-000166 - Initiation of ADCVD Investigations: Wooden Cabinets & Vanities from the PRC
U.S. Customs and Border Protection sent this bulletin at 04/01/2019 06:20 AM EDTYou are subscribed to Trade Policy Updates for U.S. Customs and Border Protection. This information has recently been updated, and is now available.
03/28/2019 09:39 AM EDT
Trade Policy Updates
On March 26, 2019, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “Wooden Cabinets and Vanities and Components Thereof from the People’s Republic of China (China)” (Initiation Notices). These investigations have been assigned the following case numbers: A-570-106 and C-570-107.
The Scope of Merchandise covered by these investigations reads as follows:
The merchandise subject to this investigation consists of wooden cabinets and vanities that are for permanent installation (including floor mounted, wall mounted, ceiling hung or by attachment of plumbing), and wooden components thereof. Wooden cabinets and vanities and wooden components are made substantially of wood products, including solid wood and engineered wood products (including those made from wood particles, fibers, or other wooden materials such as plywood, strand board, block board, particle board, or fiberboard), or bamboo. Wooden cabinets and vanities consist of a cabinet box (which typically includes a top, bottom, sides, back, base blockers, ends/end panels, stretcher rails, toe kicks, and/or shelves) and may or may not include a frame, door, drawers and/or shelves. Subject merchandise includes wooden cabinets and vanities with or without wood veneers, wood, paper or other overlays, or laminates, with or without non-wood components or trim such as metal, marble, glass, plastic, or other resins, whether or not surface finished or unfinished, and whether or not completed.
Wooden cabinets and vanities are covered by the investigation whether or not they are imported attached to, or in conjunction with, faucets, metal plumbing, sinks and/or sink bowls, or countertops. If wooden cabinets or vanities are imported attached to, or in conjunction with, such merchandise, only the wooden cabinet or vanity is covered by the scope.
Subject merchandise includes the following wooden component parts of cabinets and vanities: (1) wooden cabinet and vanity frames (2) wooden cabinet and vanity boxes (which typically include a top, bottom, sides, back, base blockers, ends/end panels, stretcher rails, toe kicks, and/or shelves), (3) wooden cabinet or vanity doors, (4) wooden cabinet or vanity drawers and drawer components (which typically include sides, backs, bottoms, and faces), (5) back panels and end panels, (6) and desks, shelves, and tables that are attached to or incorporated in the subject merchandise.
Subject merchandise includes all unassembled, assembled and/or “ready to assemble” (RTA) wooden cabinets and vanities, also commonly known as “flat packs,” except to the extent such merchandise is already covered by the scope of antidumping and countervailing duty orders on Hardwood Plywood from the People's Republic of China. See Certain Hardwood Plywood Products from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 83 FR 504 (January 4, 2018); Certain Hardwood Plywood Products from the People's Republic of China: Countervailing Duty Order, 83 FR 513 (January 4, 2018). RTA wooden cabinets and vanities are defined as cabinets or vanities packaged so that at the time of importation they may include: (1) wooden components required to assemble a cabinet or vanity (including drawer faces and doors); and (2) parts (e.g., screws, washers, dowels, nails, handles, knobs, adhesive glues) required to assemble a cabinet or vanity. RTAs may enter the United States in one or in multiple packages.
Subject merchandise also includes wooden cabinets and vanities and in-scope components that have been further processed in a third country, including but not limited to one or more of the following: trimming, cutting, notching, punching, drilling, painting, staining, finishing, assembly, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope product.
Excluded from the scope of this investigation, if entered separate from a
wooden cabinet or vanity are:
(1) Aftermarket accessory items which may be added to or installed into an interior of a cabinet and which are not considered a structural or core component of a wooden cabinet or vanity. Aftermarket accessory items may be made of wood, metal, plastic, composite material, or a combination thereof that can be inserted into a cabinet and which are utilized in the function of organization/accessibility on the interior of a cabinet; and include:
• Inserts or dividers which are placed into drawer boxes with the purpose of organizing or dividing the internal portion of the drawer into multiple areas for the purpose of containing smaller items such as cutlery, utensils, bathroom essentials, etc.
• Round or oblong inserts that rotate internally in a cabinet for the purpose of accessibility to foodstuffs, dishware, general supplies, etc.
(2) Solid wooden accessories including corbels and rosettes, which serve the primary purpose of decoration and personalization.
(3) Non-wooden cabinet hardware components including metal hinges, brackets, catches, locks, drawer slides, fasteners (nails, screws, tacks, staples), handles, and knobs.
Also excluded from the scope of this investigation are:
(1) All products covered by the scope of the antidumping duty order on Wooden Bedroom Furniture from the People’s Republic of China. See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Wooden Bedroom Furniture from the People’s Republic of China, 70 FR 329 (January 4, 2005).
(2) All products covered by the scope of the antidumping and countervailing duty orders on Hardwood Plywood from the People's Republic of China. See Certain Hardwood Plywood Products from the People’s Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 83 FR 504 (January 4, 2018); Certain Hardwood Plywood Products from the People’s Republic of China: Countervailing Duty Order, 83 FR. 513 (January 4, 2018).
Imports of subject merchandise are classified under Harmonized Tariff Schedule of the United States (HTSUS) statistical numbers 9403.40.9060 and 9403.60.8081. The subject component parts of wooden cabinets and vanities may be entered into the United States under HTSUS statistical number 9403.90.7080. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.
Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on April 15, 2019, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on April 25, 2019, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:
Amanda Brings at (202) 482-3927 or Rachel Greenberg at (202) 482-0652 (Antidumping Duty Investigation from China); and Benito Ballesteros at (202) 482-7425 or Christian Llinas at (202) 482-4877 (Countervailing Duty Investigation from China).
On March 26, 2019, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “Wooden Cabinets and Vanities and Components Thereof from the People’s Republic of China (China)” (Initiation Notices). These investigations have been assigned the following case numbers: A-570-106 and C-570-107.
The Scope of Merchandise covered by these investigations reads as follows:
The merchandise subject to this investigation consists of wooden cabinets and vanities that are for permanent installation (including floor mounted, wall mounted, ceiling hung or by attachment of plumbing), and wooden components thereof. Wooden cabinets and vanities and wooden components are made substantially of wood products, including solid wood and engineered wood products (including those made from wood particles, fibers, or other wooden materials such as plywood, strand board, block board, particle board, or fiberboard), or bamboo. Wooden cabinets and vanities consist of a cabinet box (which typically includes a top, bottom, sides, back, base blockers, ends/end panels, stretcher rails, toe kicks, and/or shelves) and may or may not include a frame, door, drawers and/or shelves. Subject merchandise includes wooden cabinets and vanities with or without wood veneers, wood, paper or other overlays, or laminates, with or without non-wood components or trim such as metal, marble, glass, plastic, or other resins, whether or not surface finished or unfinished, and whether or not completed.
Wooden cabinets and vanities are covered by the investigation whether or not they are imported attached to, or in conjunction with, faucets, metal plumbing, sinks and/or sink bowls, or countertops. If wooden cabinets or vanities are imported attached to, or in conjunction with, such merchandise, only the wooden cabinet or vanity is covered by the scope.
Subject merchandise includes the following wooden component parts of cabinets and vanities: (1) wooden cabinet and vanity frames (2) wooden cabinet and vanity boxes (which typically include a top, bottom, sides, back, base blockers, ends/end panels, stretcher rails, toe kicks, and/or shelves), (3) wooden cabinet or vanity doors, (4) wooden cabinet or vanity drawers and drawer components (which typically include sides, backs, bottoms, and faces), (5) back panels and end panels, (6) and desks, shelves, and tables that are attached to or incorporated in the subject merchandise.
Subject merchandise includes all unassembled, assembled and/or “ready to assemble” (RTA) wooden cabinets and vanities, also commonly known as “flat packs,” except to the extent such merchandise is already covered by the scope of antidumping and countervailing duty orders on Hardwood Plywood from the People's Republic of China. See Certain Hardwood Plywood Products from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 83 FR 504 (January 4, 2018); Certain Hardwood Plywood Products from the People's Republic of China: Countervailing Duty Order, 83 FR 513 (January 4, 2018). RTA wooden cabinets and vanities are defined as cabinets or vanities packaged so that at the time of importation they may include: (1) wooden components required to assemble a cabinet or vanity (including drawer faces and doors); and (2) parts (e.g., screws, washers, dowels, nails, handles, knobs, adhesive glues) required to assemble a cabinet or vanity. RTAs may enter the United States in one or in multiple packages.
Subject merchandise also includes wooden cabinets and vanities and in-scope components that have been further processed in a third country, including but not limited to one or more of the following: trimming, cutting, notching, punching, drilling, painting, staining, finishing, assembly, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the in-scope product.
Excluded from the scope of this investigation, if entered separate from a
wooden cabinet or vanity are:
(1) Aftermarket accessory items which may be added to or installed into an interior of a cabinet and which are not considered a structural or core component of a wooden cabinet or vanity. Aftermarket accessory items may be made of wood, metal, plastic, composite material, or a combination thereof that can be inserted into a cabinet and which are utilized in the function of organization/accessibility on the interior of a cabinet; and include:
• Inserts or dividers which are placed into drawer boxes with the purpose of organizing or dividing the internal portion of the drawer into multiple areas for the purpose of containing smaller items such as cutlery, utensils, bathroom essentials, etc.
• Round or oblong inserts that rotate internally in a cabinet for the purpose of accessibility to foodstuffs, dishware, general supplies, etc.
(2) Solid wooden accessories including corbels and rosettes, which serve the primary purpose of decoration and personalization.
(3) Non-wooden cabinet hardware components including metal hinges, brackets, catches, locks, drawer slides, fasteners (nails, screws, tacks, staples), handles, and knobs.
Also excluded from the scope of this investigation are:
(1) All products covered by the scope of the antidumping duty order on Wooden Bedroom Furniture from the People’s Republic of China. See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Wooden Bedroom Furniture from the People’s Republic of China, 70 FR 329 (January 4, 2005).
(2) All products covered by the scope of the antidumping and countervailing duty orders on Hardwood Plywood from the People's Republic of China. See Certain Hardwood Plywood Products from the People’s Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 83 FR 504 (January 4, 2018); Certain Hardwood Plywood Products from the People’s Republic of China: Countervailing Duty Order, 83 FR. 513 (January 4, 2018).
Imports of subject merchandise are classified under Harmonized Tariff Schedule of the United States (HTSUS) statistical numbers 9403.40.9060 and 9403.60.8081. The subject component parts of wooden cabinets and vanities may be entered into the United States under HTSUS statistical number 9403.90.7080. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.
Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on April 15, 2019, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on April 25, 2019, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:
Amanda Brings at (202) 482-3927 or Rachel Greenberg at (202) 482-0652 (Antidumping Duty Investigation from China); and Benito Ballesteros at (202) 482-7425 or Christian Llinas at (202) 482-4877 (Countervailing Duty Investigation from China).
Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page. You will need to use your e-mail address to log in. If you have questions or problems with the subscription service, please contact subscriberhelp.govdelivery.com.
This service is provided to you at no charge by U.S. Customs and Border Protection.
Privacy Policy | GovDelivery is providing this information on behalf of U.S. Department of Homeland Security, and may not use the information for any other purposes.
 |
 |