CSMS# 18-000520 - Initiation of Antidumping Duty Investigation: Steel Wheels 12 to 16.5 Inches from China

You are subscribed to Trade Policy Updates for U.S. Customs and Border Protection. This information has recently been updated, and is now available.

09/06/2018 04:08 PM EDT

Trade Policy Updates

On August 28, 2018, the Department of Commerce (Commerce) initiated its less-than-fair-value duty investigation on Certain Steel Wheels 12 to 16.5 Inches in Diameter from the People’s Republic of China (Initiation Notice). This investigation has been assigned the following case number: A-570-090.



The Scope of Merchandise covered by this investigation reads as follows:



The scope of this investigation is certain on-the-road steel wheels, discs, and rims for tubeless tires with a nominal wheel diameter of 12 inches to 16.5 inches, regardless of width. Certain on-the-road steel wheels with a nominal wheel diameter of 12 inches to 16.5 inches within the scope are generally for road and highway trailers and other towable equipment, including, inter alia, utility trailers, cargo trailers, horse trailers, boat trailers, recreational trailers, and towable mobile homes. The standard widths of certain on-the-road steel wheels are 4 inches, 4.5 inches, 5 inches, 5.5 inches, 6 inches, and 6.5 inches, but all certain on-the-road steel wheels, regardless of width, are covered by the scope.



The scope includes rims and discs for certain on-the-road steel wheels, whether imported as an assembly, unassembled, or separately. The scope includes certain on-the-road steel wheels regardless of steel composition, whether cladded or not cladded, whether finished or not finished, and whether coated or uncoated. The scope also includes certain on-the-road steel wheels with discs in either a “hub-piloted” or “stud-piloted” mounting configuration, though the stud-piloted configuration is most common in the size range covered.



All on-the-road wheels sold in the United States must meet Standard 110 or 120 of the National Highway Traffic Safety Administration’s (NHTSA) Federal Motor Vehicle Safety Standards, which requires a rim marking, such as the “DOT” symbol, indicating compliance with applicable motor vehicle standards. See 49 C.F.R. § 571.110 and § 571.120. The scope includes certain on-the-road steel wheels imported with or without NHTSA’s required markings.

Certain on-the-road steel wheels imported as an assembly with a tire mounted on the wheel and/or with a valve stem or rims imported as an assembly with a tire mounted on the rim and/or with a valve stem are included in the scope of this investigation. However, if the steel wheels or rims are imported as an assembly with a tire mounted on the wheel or rim and/or with a valve stem attached, the tire and/or valve stem is not covered by the scope.



Excluded from this scope are the following:



1) steel wheels for use with tube-type tires; such tires use multi piece rims, which are two-piece and three-piece assemblies and require the use of an inner tube;



2) aluminum wheels;



3) certain on-the-road steel wheels that are coated entirely with chrome; and



4) steel wheels that do not meet Standard 110 or 120 of the NHTSA’s requirements other than the rim marking requirements found in 49 C.F.R. § 571.110S4.4.2 and § 571.120S5.2.



Certain on-the-road steel wheels subject to this investigation are properly classifiable under the following category of the Harmonized Tariff Schedule of the United States (HTSUS): 8716.90.5035 which covers the exact product covered by the scope whether entered as an assembled wheel or in components. Certain on-the-road steel wheels entered with a tire mounted on them may be entered under HTSUS 8716.90.5059 (Trailers and semi-trailers; other vehicles, not mechanically propelled, parts, wheels, other, wheels with other tires) (a category that will be broader than what is covered by the scope). While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the subject merchandise is dispositive.



Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.



Deadline for Submitting Comments:

As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on September 17, 2018, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on September 27, 2018, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.



Required Entry of Appearance:

Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.



All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.



For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:



ACCESS: Help Link

https://access.trade.gov/help.aspx



ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf



ACCESS: Handbook on Electronic Filing Procedures

https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf



Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)

http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf



Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)

http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf



Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html



Required Certifications:

Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.



For Further Information Contact:

AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:



Paul Stolz at (202) 482-4474 (Antidumping Duty Investigation from China); or

Jonathan Cornfield at (202) 482-3855 (Antidumping Duty Investigation from China).