CSMS# 18-000346 - Initiation of AD/CVD Investigations: Certain Quartz Surface Products from the PRC
U.S. Customs and Border Protection sent this bulletin at 05/16/2018 02:25 PM EDTYou are subscribed to Automated Broker Interface for U.S. Customs and Border Protection. This information has recently been updated, and is now available.
05/16/2018 02:11 PM EDT
Automated Broker Interface
Initiation of Antidumping and Countervailing Duty Investigations:
Certain Quartz Surface Products from the People’s Republic of China
On May 7, 2018, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “Certain Quartz Surface Products from the People’s Republic of China (China)” (Initiation Notices). These investigations have been assigned the following case numbers: A-570-084 and C-570-085.
The Scope of Merchandise covered by these investigations reads as follows:
The merchandise covered by the investigation is certain quartz surface products. 1
Quartz surface products consist of slabs and other surfaces created from a mixture of materials that includes predominately silica (e.g., quartz, quartz powder, cristobalite) as well as a resin binder (e.g., an unsaturated polyester). The incorporation of other materials, including, but not limited to, pigments, cement, or other additives does not remove the merchandise from the scope of the investigation. However, the scope of the investigation only includes products where the silica content is greater than any other single material, by actual weight. Quartz surface products are typically sold as rectangular slabs with a total surface area of approximately 45 to 60 square feet and a nominal thickness of one, two, or three centimeters. However, the scope of this investigation includes surface products of all other sizes, thicknesses, and shapes. In addition to slabs, the scope of this investigation includes, but is not limited to, other surfaces such as countertops, backsplashes, vanity tops, bar tops, work tops, tabletops, flooring, wall facing, shower surrounds, fire place surrounds, mantels, and tiles. Certain quartz surface products are covered by the investigation whether polished or unpolished, cut or uncut, fabricated or not fabricated, cured or uncured, edged or not edged, finished or unfinished, thermoformed or not thermoformed, packaged or unpackaged, and regardless of the type of surface finish.
In addition, quartz surface products are covered by the investigation whether or not they are imported attached to, or in conjunction with, non-subject merchandise such as sinks, sink bowls, vanities, cabinets, and furniture. If quartz surface products are imported attached to, or in conjunction with, such non-subject merchandise, only the quartz surface product is covered by the scope.
Subject merchandise includes material matching the above description that has been finished, packaged, or otherwise fabricated in a third country, including by cutting, polishing, curing, edging, thermoforming, attaching to, or packaging with another product, or any other finishing, packaging, or fabrication that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the quartz surface products.
The scope of the investigation does not cover quarried stone surface products, such as granite, marble, soapstone, or quartzite. Specifically excluded from the scope of the investigation are crushed glass surface products. Crushed glass surface products are surface products in which the crushed glass content is greater than any other single material, by actual weight.
The products subject to the scope are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under the following subheading: 6810.99.0010. Subject merchandise may also enter under subheadings 6810.11.0010, 6810.11.0070, 6810.19.1200, 6810.19.1400, 6810.19.5000, 6810.91.0000, 6810.99.0080, 6815.99.4070, 2506.10.0010, 2506.10.0050, 2506.20.0010, 2506.20.0080. The HTSUS subheadings set forth above are provided for convenience and U.S. Customs purposes only. The written description of the scope is dispositive.
-----------------------------------------------------------------------------
1
Quartz surface products may also generally be referred to as engineered stone or quartz, artificial stone or quartz, agglomerated stone or quartz, synthetic stone or quartz, processed stone or quartz, manufactured stone or quartz, and Bretonstone®.
-----------------------------------------------------------------------------
Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on May 29, 2018, which is the next day after 20 calendar days from the signature date of the notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on June 8, 2018, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 1401 Constitution Avenue, NW, Washington, DC 20230:
For AD related inquiries: Andrew Medley at (202) 482-4987; or Whitley Herndon (202) 482-6274.
For CVD related inquiries: Darla Brown at (202) 482-1791; Joshua Tucker at (202) 482-2044; or Terre Keaton Stefanova at (202) 482-1280.
Initiation of Antidumping and Countervailing Duty Investigations:
Certain Quartz Surface Products from the People’s Republic of China
On May 7, 2018, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “Certain Quartz Surface Products from the People’s Republic of China (China)” (Initiation Notices). These investigations have been assigned the following case numbers: A-570-084 and C-570-085.
The Scope of Merchandise covered by these investigations reads as follows:
The merchandise covered by the investigation is certain quartz surface products. 1
Quartz surface products consist of slabs and other surfaces created from a mixture of materials that includes predominately silica (e.g., quartz, quartz powder, cristobalite) as well as a resin binder (e.g., an unsaturated polyester). The incorporation of other materials, including, but not limited to, pigments, cement, or other additives does not remove the merchandise from the scope of the investigation. However, the scope of the investigation only includes products where the silica content is greater than any other single material, by actual weight. Quartz surface products are typically sold as rectangular slabs with a total surface area of approximately 45 to 60 square feet and a nominal thickness of one, two, or three centimeters. However, the scope of this investigation includes surface products of all other sizes, thicknesses, and shapes. In addition to slabs, the scope of this investigation includes, but is not limited to, other surfaces such as countertops, backsplashes, vanity tops, bar tops, work tops, tabletops, flooring, wall facing, shower surrounds, fire place surrounds, mantels, and tiles. Certain quartz surface products are covered by the investigation whether polished or unpolished, cut or uncut, fabricated or not fabricated, cured or uncured, edged or not edged, finished or unfinished, thermoformed or not thermoformed, packaged or unpackaged, and regardless of the type of surface finish.
In addition, quartz surface products are covered by the investigation whether or not they are imported attached to, or in conjunction with, non-subject merchandise such as sinks, sink bowls, vanities, cabinets, and furniture. If quartz surface products are imported attached to, or in conjunction with, such non-subject merchandise, only the quartz surface product is covered by the scope.
Subject merchandise includes material matching the above description that has been finished, packaged, or otherwise fabricated in a third country, including by cutting, polishing, curing, edging, thermoforming, attaching to, or packaging with another product, or any other finishing, packaging, or fabrication that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the quartz surface products.
The scope of the investigation does not cover quarried stone surface products, such as granite, marble, soapstone, or quartzite. Specifically excluded from the scope of the investigation are crushed glass surface products. Crushed glass surface products are surface products in which the crushed glass content is greater than any other single material, by actual weight.
The products subject to the scope are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under the following subheading: 6810.99.0010. Subject merchandise may also enter under subheadings 6810.11.0010, 6810.11.0070, 6810.19.1200, 6810.19.1400, 6810.19.5000, 6810.91.0000, 6810.99.0080, 6815.99.4070, 2506.10.0010, 2506.10.0050, 2506.20.0010, 2506.20.0080. The HTSUS subheadings set forth above are provided for convenience and U.S. Customs purposes only. The written description of the scope is dispositive.
-----------------------------------------------------------------------------
1
Quartz surface products may also generally be referred to as engineered stone or quartz, artificial stone or quartz, agglomerated stone or quartz, synthetic stone or quartz, processed stone or quartz, manufactured stone or quartz, and Bretonstone®.
-----------------------------------------------------------------------------
Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on May 29, 2018, which is the next day after 20 calendar days from the signature date of the notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on June 8, 2018, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 1401 Constitution Avenue, NW, Washington, DC 20230:
For AD related inquiries: Andrew Medley at (202) 482-4987; or Whitley Herndon (202) 482-6274.
For CVD related inquiries: Darla Brown at (202) 482-1791; Joshua Tucker at (202) 482-2044; or Terre Keaton Stefanova at (202) 482-1280.
Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page. You will need to use your e-mail address to log in. If you have questions or problems with the subscription service, please contact subscriberhelp.govdelivery.com.
This service is provided to you at no charge by U.S. Customs and Border Protection.
Privacy Policy | GovDelivery is providing this information on behalf of U.S. Department of Homeland Security, and may not use the information for any other purposes.
 |
 |