CSMS# 17-000234 - Initiation of AD/CVD Investigations: Carton-Closing Staples from the PRC
U.S. Customs and Border Protection sent this bulletin at 04/24/2017 03:26 PM EDTYou are subscribed to ACE Portal Accounts for U.S. Customs and Border Protection. This information has recently been updated, and is now available.
04/24/2017 03:16 PM EDT
ACE Portal Accounts
On April 20, 2017, the Department of Commerce (Commerce) initiated its less-than-fair-value investigation on “Carton-Closing Staples from the People’s Republic of China.” (Initiation Notice). This investigation has been assigned case number A-570-055.
The Scope of Merchandise covered by this investigation reads as follows:
The scope of this investigation is carton-closing staples. Carton-closing staples may be manufactured from carbon, alloy, or stainless steel wire, and are included in the scope of the investigation regardless of whether they are uncoated or coated, regardless of the type of coating.
Carton-closing staples are generally made to American Society for Testing and Materials (ASTM) specification ASTM D1974/D1974M- 16, but can also be made to other specifications. Regardless of specification, however, all carton-closing staples meeting the scope description are included in the scope. Carton-closing staples include stick staple products, often referred to as staple strips, and roll staple products, often referred to as coils. Stick staples are lightly cemented or lacquered together to facilitate handling and loading into stapling machines. Roll staples are taped together along their crowns. Carton-closing staples are covered regardless of whether they are imported in stick form or roll form.
Carton-closing staples vary by the size of the wire, the width of the crown, and the length of the leg. The nominal leg length ranges from 0.4095 inch to 1.375 inches and the nominal crown width ranges from 1.125 inches to 1.375 inches. The size of the wire used in the production of carton-closing staples varies from 0.029 to 0.064 inch (nominal thickness) by 0.064 to 0.100 inch (nominal width).
Carton-closing staples subject to this investigation are currently classifiable under subheadings 8305.20.00.00 and 7317.00.65.60 of the Harmonized Tariff Schedule of the United States (“HTSUS”). While the HTSUS subheadings and ASTM specification are provided for convenience and for customs purposes, the written description of the subject merchandise is dispositive.
Requirements for Submitting Comments On the Scope of the Investigation: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notice, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determination, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. In order to facilitate preparation of its questionnaires, the Department requests all interested parties to submit such comments by 5:00 p.m. Eastern Time (ET) on Wednesday, May 10, 2017. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on Monday, May 22, 2017.
The Department requests that any factual information the parties consider relevant to the scope of the investigation be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigation may be relevant, the party may contact the Department and request permission to submit the additional information. All such comments must be filed on the record of the AD investigation identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Certification Requirements
Any party submitting factual information in an AD or CVD proceeding must certify to the accuracy and completeness of that information. Parties are hereby reminded that revised certification requirements are in effect for company/government officials, as well as their representatives. Investigations initiated on the basis of petition filed on or after August 16, 2013, and other segments of any AD or CVD proceedings initiated on or after August 16, 2013, should use the formats for the revised certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:
Irene Gorelik at (202) 482-6905 (Antidumping Duty Investigation).
On April 20, 2017, the Department of Commerce (Commerce) initiated its less-than-fair-value investigation on “Carton-Closing Staples from the People’s Republic of China.” (Initiation Notice). This investigation has been assigned case number A-570-055.
The Scope of Merchandise covered by this investigation reads as follows:
The scope of this investigation is carton-closing staples. Carton-closing staples may be manufactured from carbon, alloy, or stainless steel wire, and are included in the scope of the investigation regardless of whether they are uncoated or coated, regardless of the type of coating.
Carton-closing staples are generally made to American Society for Testing and Materials (ASTM) specification ASTM D1974/D1974M- 16, but can also be made to other specifications. Regardless of specification, however, all carton-closing staples meeting the scope description are included in the scope. Carton-closing staples include stick staple products, often referred to as staple strips, and roll staple products, often referred to as coils. Stick staples are lightly cemented or lacquered together to facilitate handling and loading into stapling machines. Roll staples are taped together along their crowns. Carton-closing staples are covered regardless of whether they are imported in stick form or roll form.
Carton-closing staples vary by the size of the wire, the width of the crown, and the length of the leg. The nominal leg length ranges from 0.4095 inch to 1.375 inches and the nominal crown width ranges from 1.125 inches to 1.375 inches. The size of the wire used in the production of carton-closing staples varies from 0.029 to 0.064 inch (nominal thickness) by 0.064 to 0.100 inch (nominal width).
Carton-closing staples subject to this investigation are currently classifiable under subheadings 8305.20.00.00 and 7317.00.65.60 of the Harmonized Tariff Schedule of the United States (“HTSUS”). While the HTSUS subheadings and ASTM specification are provided for convenience and for customs purposes, the written description of the subject merchandise is dispositive.
Requirements for Submitting Comments On the Scope of the Investigation: Please be sure to comply with all three requirements established below.
Deadline for Submitting Comments:
As announced in the Initiation Notice, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determination, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. In order to facilitate preparation of its questionnaires, the Department requests all interested parties to submit such comments by 5:00 p.m. Eastern Time (ET) on Wednesday, May 10, 2017. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on Monday, May 22, 2017.
The Department requests that any factual information the parties consider relevant to the scope of the investigation be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigation may be relevant, the party may contact the Department and request permission to submit the additional information. All such comments must be filed on the record of the AD investigation identified above.
Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce’s regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.
All submissions to Commerce must be filed electronically using Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance’s APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.
For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:
ACCESS: Help Link
https://access.trade.gov/help.aspx
ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf
ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf
Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf
Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf
Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html
Certification Requirements
Any party submitting factual information in an AD or CVD proceeding must certify to the accuracy and completeness of that information. Parties are hereby reminded that revised certification requirements are in effect for company/government officials, as well as their representatives. Investigations initiated on the basis of petition filed on or after August 16, 2013, and other segments of any AD or CVD proceedings initiated on or after August 16, 2013, should use the formats for the revised certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:
Irene Gorelik at (202) 482-6905 (Antidumping Duty Investigation).
Update your subscriptions, modify your password or e-mail address, or stop subscriptions at any time on your Subscriber Preferences Page. You will need to use your e-mail address to log in. If you have questions or problems with the subscription service, please contact subscriberhelp.govdelivery.com.
This service is provided to you at no charge by U.S. Customs and Border Protection.
Privacy Policy | GovDelivery is providing this information on behalf of U.S. Department of Homeland Security, and may not use the information for any other purposes.
 |
 |