|
https://content.govdelivery.com/accounts/MNORGMETC/bulletins/430363e |
|
|
The Metro Plant Dry Vactor disposal site will have an entry and exit detour due to an asphalt repair project. This repair is scheduled for Tuesday-Thursday, October 27-29.
To enter and exit the Dry Vactor disposal site during this time:
- Sign in at the West Guard Shack as normal to get access to the alternate Liquid Waste Receiving (LWR) gate.
- Enter the LWR disposal site area through the bypass lane on the left. Do not drive over the scale.
- Drive passed the disposal site area and be aware of hauler traffic.
- Drive through the LWR Gate #22 shown in the picture below.
- Proceed to the Dry Vactor disposal site.
- Exit the same way you entered.
See picture below showing alternate route for the Dry Vactor disposal site.
Wet Vactor Haulers that need to also discharge at the Dry Vactor site, must:
- Enter at the West Guard Shack and use the Wet Vactor site as normal.
- Exit at the West Guard Shack after discharging your wet load.
- Let the guard know you need access to the Dry Vactor site.
- Enter the Dry Vactor site following the instructions above.
 We apologize for this inconvenience and appreciate your cooperation while we work to complete this repair.
For questions please contact:
|
|
 metrocouncil.org/IndustrialWaste | email: IWPP@metc.state.mn.us
You are receiving this message because we need to communicate with you as a Metropolitan Council Industrial Waste and Pollution Prevention customer. By unsubscribing, you will no longer receive important news and notifications through this GovDelivery service regarding the Met Council’s industrial pretreatment program and wastewater discharge permit you may hold.
|
|
|
|
