FOR IMMEDIATE RELEASE
April 25, 2018
Chip and Seal Operations Set to Begin District Wide
UNDATED – The Indiana Department of
Transportation announces that chip and seal operations will begin district wide
on April 30th.
Depending upon weather conditions,
INDOT crews will begin chip and seal operations on State Road 168 near Owensville.
Multiple locations are scheduled for chip and seal operations, with work
scheduled to last 6-8 weeks. Typically work to chip and seal in one location
will last for about four days depending upon weather conditions and will be
done under full road closures to prevent damage to both vehicles and the
roadway. This also increases the quality of the finished roadway. After chip
and seal operations are complete, any loose aggregate will be swept away from
the road.
Chip and seal operations, on
average, extend the life of pavement by three to five years. For every $1 spent
on chip and seal, taxpayers save $6-14 in future road rehabilitation and
construction costs. Motorists should remember to slow down, increase following
distance, obey all work zone signs and flaggers, and plan for extra time to get
to your destination.
The schedule of chip and seal
operations is as follows (all dates are weather dependent):
- Monday, April 30 SR 168 in from County Road 600 S to
just west of the Fort Branch town limits
-
Friday May 4, S.R. 65 (two locations), from the
Gibson/Pike County line to S.R. 56 and From the north end of the Patoka River
Bridge to the Gibson/Pike County line.
- May 14, S.R. 56 (three locations) from U.S. 41 to
Gibson/Pike County line, from the Gibson/Pike County line to S.R. 65 and from
S.R. 65 to the west city limit of Petersburg.
-
May 22, S.R. 364 in Pike County from S.R. 61 to the end
of the road.
-
May 29, S.R. 48 (four locations) from North Thomas
Street (east of Shelburn town limit) to the Sullivan/Clay County line, From
Sullivan/Clay County Line to the Clay/Greene County line, From Clay/Green
County line to C.R. 1450 W (West town limit of Jasonville), and from just east
of S.R. 59 to S.R. 157 in Greene County.
-
June 11, S.R. 59 in Greene County from West C.R. 300 N
to S.R. 48.
-
June 15, S.R. 159 in Knox Couny from Brocksmith/Oaktown
Road (North of the Bicknell City limit) to S.R. 58.
-
June 22, S.R. 245 in Spencer County from S.R. 70 to the
north side of C.R. 1300 N
-
June 27, S.R. 68 in Posey County from S.R. 69 to the
west town limit of Poseyville.
INDOT urges drivers to slow down and stay alert near
crews.
Stay Informed
Motorists can learn about highway work zones and other traffic
alerts at indot.carsprogram.org, 1-800-261-ROAD (7623)
or 511 from a mobile phone.
Subscribe to receive text and email alerts about INDOT projects
at https://public.govdelivery.com/accounts/INDOT/subscriber/new.
Follow @INDOTSouthwest on Twitter and at Facebook.com/INDOTVincennesDistrict.
|