|
|
 |
|
 |
 |
2013 Summer Regional Meeting Update
NIST MEP will host two regional update meetings in Denver and Philadelphia this summer. We anticipate that centers from the Pacific Northwest, Southwest and Midwest will be interested in attending Denver and centers in the Northeast, Mid-Atlantic and Southeast will be interested in attending Philadelphia based on locations, however, both meeting are open to all. In conjunction with the Summer regional meeting in Denver, NIST MEP will also be holding the Advisory Board meeting on June 24, 2013. This meeting is open to all interested in attending.
Throughout the year, NIST MEP hosts regular update meetings for the MEP system including center leadership and other relevant staff to discuss the status of the MEP system, changes in manufacturing, and how best to position the MEP to provide these services going forward. It is critical for NIST MEP to focus on growing the capacity and skill set of the MEP system in order to meet the demand for services and the changing needs of the manufacturers in responding to expanding global competition. These meetings provide MEP with the opportunity to ensure center staff are educated and aware of the latest tools, topics, and goals of the MEP system.
Each meeting will begin at 8:00am on Day 1 and conclude by 2:30pm on Day 2. Some of the topics that will be covered include:
- Overview of the NIST MEP Strategic Plan
- Update on the MEP System Collaboratory
- Center and Project Impact Analysis
- Knowledge Management
- Market Industry Analysis & Outlook
- Panel Discussion: Engaging a CEO in Transformational Dialog
These update meetings are open to all Center staff. The intent of them is to provide an opportunity for all levels of the organization to gain a better understanding of the activities occurring within the MEP system. See below for location and venue information. As soon as the room block and registration for these meetings are open we will send out a system-wide message.
MEP Center Regions of Pacific NW, Southwest, Midwest (June 25-26, 2013)
Location: Hyatt Regency Denver Tech
7800 East Tufts Avenue, Denver, CO 80237
(303)779-1234
www.techcenter.hyatt.com
MEP Center Regions of Northeast, Mid-Atlantic, Southeast (July 23-24, 2013)
Location: Embassy Suite Philadelphia Airport
9000 Bartram Avenue, Philadelphia, PA 19153
(215)365-4500
www.philadelphiaairport.ebassysuites.com
If you have any questions please contact Kari Reidy at Kari.reidy@nist.gov| (301) 975-4919
Back to Top
Final Chance for Edison Nation Supplier “Made in America” Scouting Opportunities
Edison Nation®, an idea-to-shelf product developer and innovation platform has partnered once again with the NIST MEP on their Made in America Program. This program, gives U.S.-based manufacturers the first chance to bid on producing new products for large, established companies. The companies and brands participating in this program are Belk, Bob Timberlake, Snapware, Pyrex, Chicago Cutlery, Corelle, Worx, and ToyQuest.
This is a great opportunity for U.S. based manufacturers to bid on making products with a guaranteed large distribution channel. The product requests for quotes (RFQs) that are currently available include:
-
WORX, ToyQUEST - Due by May 8, 2013 (Due date was extended)
If you have a manufacturer considering quoting, but you do not think the manufacturer will make the deadline, please contact Dave Cranmer (David.Cranmer@nist.gov | 301-975-5753 or Caroline Ranghel Ashley (Ranghel@rti.org | 919- 541-6822
Back to Top
Federal Funding Opportunity Update: MEP Center for Nebraska
A webcast explaining this funding opportunity has been posted and is available for viewing. Click here to view the Webcast slides and recording.
NIST invites proposals from eligible proposers for funding one (1) MEP center to provide manufacturing extension services to primarily small and medium-sized manufacturers in Nebraska. The MEP center will become part of the MEP national system of extension service providers, currently comprised of more than 400 centers and field offices located throughout the United States and Puerto Rico. For more information about the Federal Funding Opportunity, click here. Additional information on the proposal process is available in the notice of Federal Funding Opportunity posted at www.grants.gov under Funding Opportunity Number 2013-NIST-MEP-NE-01 . All Proposals are due on June 10, 2013 by 5:00pm EST.
For further information or to register for the April 25th webinar, please contact Diane Henderson at diane.henderson@nist.gov | (301) 975-5105
Back to Top
What's Happening Around MEP
Manufacturing Advocacy & Growth Network (MAGNET) Vacancy Announcement: Senior Sales Engineer
MAGNET is seeking a Senior Sales Engineer to generate opportunities with new and existing customers for MAGNET services. The Senior Sales Engineer is expected to act as a business advisor during the sales process to develop and maintain client relationships. The transactions generated by this individual result in client engagements ranging from services related to business growth and productivity improvement. A thorough knowledge of the manufacturing sector will help the successful candidate sell MAGNET’S consulting services that include, but are not limited to: Product Design and Engineering, Value Product Engineering and Value Process Engineering, Growth Planning and Market Diversification, Continuous Improvement, Sustainable Manufacturing, Quality Management Systems, and Workforce and Organization Development.
This position works closely with the MAGNET delivery team of consulting and engineering services to develop proposals with a clearly defined project scope and statement of work.
For more information, or to apply for this position, visit MAGNET's website or contact Veronica Wright at veronica.wright@magnetwork.org | (216) 432-5204.
Impact Washington Vacancy Announcement: Director, Business Development
Impact Washington is looking for a Director of Business Development to help achieve company goals for increased revenue growth and implementation of Washington's market segmentation growth strategy. The individual selected for this position will work closely with the President, and will develop and implement business development strategies for the organization. This position is responsible for providing leadership, coaching and direction to the Impact Washington Project Management staff to meet or exceed company goals for revenue growth, tactical plan development and implementation of the market segmentation growth strategy.
For more information, or to apply for this position, please contact jobpostings@impactwashington.org or Linda Adams at ladams@impactwashington.org | (425) 438-1146 x107.
MEP in the NEWS
-
ExporTech program helps Las Vegas businesses compete worldwide When Tate Snyder Kimsey was founded in 1960 as George G. Tate & Associates, the architectural firm specialized in designing public schools and government buildings in Nevada. Fifty-three years later, the Henderson-based company is doing business in China, and hopes to do more. Read Article
-
New Manufacturing Extension Centers Planned for Arizona and Rhode Island The National Institute of Standards and Technology’s (NIST) Hollings Manufacturing Extension Partnership (MEP) program has awarded cooperative agreements to the Arizona Commerce Authority and the University of Rhode Island Research Foundation to serve the small and mid-size manufacturers in their respective states.Read Article
-
Made In Oklahoma Oklahoma Magazine interviews Chuck Prucha, Center Director for Oklahoma Manufacturing Alliance Center Director, and profiled five MEP clients to discuss Manufacturing in Oklahoma Read Article
-
NEPIRC and ITIF Lead Global Landscapes Forum Discussion on Manufacturing Innovation NEPIRC and the Innovation Technology & Innovation Foundation (ITIF) provided an international audience of over 100 professionals, educators and business students at the King’s College Global Landscapes Conference. Eric Joseph Esoda, NEPIRC’s Executive Director and CEO, provided an update on best practices in innovation management within the manufacturing sector. Read Article
-
CONNSTEP just published their latest Magazine The CONNSTEP Advantage Magazine, Vol 3, Issue 1: Riding the Lean Growth Wave. The issue contains an article from Harry Moser (Reshoring Momentum Continues to Build), a State of Connecticut Manufacturing Infographic and other manufacturing topics. Read the Issue
Calendar of Events 
May 9, 2013
Export Regulation Course - Export Compliance Under International Traffic in Arms Regulations (ITAR)
LIFT, MEP Center of New York, is pleased to have Mr. Robert Imbriani, an experienced controls specialist from Team International Trade Service who will present a 1 day seminar designed for those who are involved in supporting their companies' compliance program or would like to know more about Export Compliance and ITAR.
Event Details
Time: 8:00 a.m. - 4:30 p.m. EST
Location: The Morrelly Homeland Security Center, Bethpage, NY
Contact: Lucy Lawl | (631) 846-2473
May 9, 2013 from 9:30 a.m. to 3:30 p.m.EST
GaMEP Annual Lean Consortium Event: High Velocity Edge: Leadership, Innovation, & Operational Excellence
Join the GaMEP, Georgia MEP, for their annual Lean Consortium event and gain a better understanding of the speed, breadth, and determination it takes to separate manufacturing companies from others. Learn about “high velocity” companies and what drives their success in the quest for relentless betterment. Understand the capabilities necessary for high speed, broad-based improvement and learn how to overcome inevitable struggles when dealing with complex products and processes
Event Details and Registration
Cost: $295
Location: The Morrow Center in Morrow, Georgia
Contact: Katie Takacs | (404) 385-0542
May 14, 2013 from 9:00 a.m. to 3:00 p.m. CST
Family Business Advisor Seminar
TMAC is hosting a one-day Family Business Advisor seminar event. The seminar will focus on strategic planning for the future of family and closely-held business, protecting the jobs that have been created, and ensuring the future viability and value of those businesses after they are passed down to future generations. Learn how to prioritize and plan for business growth for the future. Discover policy gaps in critical areas such as governance, finances, and compensation. And Identify the timing and necessity for outside advisor support
Event Details and Registration
Cost: $60 per admission, $20 per additional guest
Location: Rangers Ballpart in Arlington, Texas
Contact: Debborreh Wallace | (818) 272-3513
May 14, 2013
CONNSTEP Technology Acceleration Workshop
CONNSTEP is hosting a Technology Acceleration Workshop, May 14th in Rocky Hill, Connecticut. In partnership with the Connecticut Innovation EcoSystem, and presented by Tom Culver of RTI and Ed Maier of CE Ventures, topics covered during this half-day workshop include Technology Scouting, Technology Driven Market Intelligence (TDMI) and Lean Product Development. Developed for both start-up companies and mature businesses trying to accelerate growth, this interactive workshop will offer insights and pathways to improve present practices for growth.
Event Details
Cost: $99.00
Location: 716 Brook Street, Rocky Hills, CT
Contact: Rebecca Mead | (860) 513-3217
May - December 13, 2013
MEP Innovation Services / Training – 2013
The Black Belt training schedule for 2013 is listed below. If you would like to register, please email Kari Reidy with the name of the individual(s) you are registering and their proposed dates. Because NIST MEP is making a significant investment in the cost of this training we do expect that those registering are committed to this program and agree to complete their Black Belt certification within the 1 year time requirement.
Please read the updated policies, procedures and FAQs that are posted on MEIS. This document explains the changes and updated policies to the Black Belt certification program and will continue to be updated with the latest FAQs.
- May 13 - 17 (FULL)
- June 9 - 13 (location: University of Maine - open to all)
- July 22 - 26 (FULL
- August 19 - 23
- September 23 - 27
- October 21 - 25
- November 11 - 15
- December 9 - 13
If you have any questions about the policies, about Black Belt certification, or to schedule training, please contact Kari Reidy at Kari.reidy@nist.gov| (301) 975-4919
May 17, 2013
NEW!!! Process Excellence & Innovation Conference
NEPIRC and The Consortium for Process Excellence and Innovation is pleased to announce the first ever, one day Process Excellence and Innovation Conference designed to help Consortium member companies and manufacturers in northeastern Pennsylvania enhance their learning of Continuous Improvement and Innovation. All sessions, except for our keynote address (Session A) are 50 minutes in length. A continental breakfast and lunch will be provided.
Click here for more information and to register
May 17, 2013
U.S. Commercial Service Trade Winds – Asia
Seoul, Korea and the dynamic cities of Hong Kong, Taipei, Tokyo and Manila offer global sales potential for U.S. businesses in a range of industry sectors. Learn how to increase profits and overcome barriers in the growing Asia-Pacific region and network with the region's leading industry and government officials and experienced U.S. and global companies. Meet one-on-one with top Asia business experts from the U.S. Embassies and Consulates from the region for the latest trade leads and market entry strategies. Find a partner or customer through screened business-to-business meetings in Korea, Philippines, Hong Kong, Taiwan and Japan.
Info: Register your interest to receive a complimentary market assessment at exportgov. For additional information, contact tradewindsasia@trade.gov, Leslie.drake@trade.gov or judy.kornfeld@trade.gov.
May 17- June 11, 2013 2:00p.m. - 3:30p.m. EST
Lean Product Development Webinar Series
NIST MEP will host 6 webinars and you are encouraged to commit to attend all 6 sessions. Presenter, Ron Mascitelli, will provide detailed coaching corresponding to specific chapters from the “Mastering Lean Product Development” textbook and recommend you procure a copy of the book in advance and read the appropriate chapters prior to each webinar. Copies of the book are available through the following link. www.techper.com/books
The schedule for the webinar series are listed below. Each webinar will start at 2:00pm EST and end at 3:30 p.m. EST.
- Friday, April 5 - Session 1: Building a Business Case Brief and Prioritizing Development Projects
- Friday, April 19 - Session 2: Managing Development Resources in a Multi-Project Environment
- Friday, May 3 - Session 3: Visual Workflow Management / Visual Project Boards
- Friday, May 17 - Session 4: Defining Market Requirements for a New Product
- Friday, May 31 - Session 5: Visual Project Planning and Risk Management
- Tuesday, June 11th - Session 6: LPD Sales process and implementation
For additional information, please contact Brian Lagas at Brian.Lagas@nist.gov, 301-9
May 23, 2013 at 1:00 p.m. EST
Additive Manufacturing: Industrial Applications
Two Additive Manufacturing (AM) Equipment Manufacturers, EOS and ExOne, will discuss how their machines are designed for industrial applications. They'll present on types of applications and industries that are already using AM and specifications for final product including materials, dimensions, repeatability, mechanical properties, build strategies and so forth.
Webinar Link
Password: Additivem@n1
Meeting Number: 736 268 559
Contact: Clara Asmail
June 5, 2013
NEW!!! 2013 CONNSTEP Conference
The 2013 CONNSTEP Conference is an unequaled opportunity for manufacturers, healthcare organizations and service industries to learn, network and collaborate. Moving Forward: Operational Excellence to Profitable Growth: Immerse yourself in an inspiring program including keynote speakers, interactive workshops, and networking. You will be energized with real, actionable ideas to lead your organization to performance excellence and profitable growth. The Conference brings together the experience of industry experts and fellow leaders to share their best practice methods on how to implement strategies that help organizations thrive.
Full schedule of events and program descriptions can be found at www.connstepconference.org. For questions please contact Rebecca Mead
Back to Top
 |
|
Make it in America" Manufacturer of the Week!
|
Wendell August, a client of NWIRC,is America’s oldest forge, producing hand-wrought ornamental and elegant metal giftware since 1923. The heritage art of Wendell August is preserved by the company’s artisans and craftsmen using anvils, chisels and hammers to create heirloom and custom pieces in aluminum, bronze, pewter, sterling silver, and other metals.
Visit the NIST MEP public site to learn more about this company and how the center is helping them grow.
For more information about NIST MEP's "Make it in America" Manufacturer of the Week, please contact Karen Lellock (karen.lellock@nist.gov | 301-975-4269).
Back to Top
|
If you have questions, comments or would like to submit a e-blast item, send a message to mepeblast@nist.gov
|
 |
Send us your News Clips! Email us at 